Ponytail

He says nothing. He writes one line. It works.

80-94% less code · 3-6× faster · 42-75% cheaper
Per-task code, latency, and cost on the Claude API, not your plan's quota. Median across Haiku, Sonnet, and Opus (10 runs for code and latency, 30 for the re-verified cost). Results vary by model and prompt: the ruleset re-injects each turn, so on a short prompt or a terse reasoning model that overhead can outweigh the savings. Reproduce it yourself.

---

You know him. Long ponytail. Oval glasses. Has been at the company longer than the version control. You show him fifty lines; he looks at them, says nothing, and replaces them with one.

Ponytail puts him inside your AI agent.

Before / after

You ask for a date picker. Your agent installs flatpickr, writes a wrapper component, adds a stylesheet, and starts a discussion about timezones.

With ponytail:

<!-- ponytail: browser has one -->
<input type="date">

More survivors in examples/.

Numbers

Five everyday tasks (email validator, debounce, CSV sum, countdown timer, rate limiter), three models, three arms: no skill, the caveman skill, and ponytail. Ten runs per cell, median reported.

80-94% less code, 42-75% less cost, and 3-6× faster than a no-skill agent, on every Claude model. Every shortcut ponytail takes is marked in the code with a ponytail: comment naming its upgrade path. Reproduce it yourself: npx promptfoo eval -c benchmarks/promptfooconfig.yaml. Method and raw numbers: benchmarks/. Production-grade tasks, where an unconstrained agent bloats far more, are written up in benchmarks/results/.

That is the byproduct, not the pitch. These are Claude numbers, and they vary by model. Capable instruction-following models follow the ladder and write far less, cheaper and faster. Terse reasoning models can go the other way: the ladder is a deliberation step, so the model spends thinking tokens working through the rungs before it saves any output, and together with the always-on ruleset that can cost more than the shorter code saves. On GPT-5.5 it does. And all of this is single-shot, one prompt in and one answer out: a real agent session re-injects the ruleset and runs the ladder every turn, which this benchmark does not measure, so per-session cost can land either way. The rule was never "fewest tokens." It is: write only what the task needs, and never cut validation, error handling, security, or accessibility. The code ends up small because it is necessary, not golfed, and that is the part that stays maintainable. Lower cost and latency are a side effect on the models that follow it.

How it works

Before writing code, the agent stops at the first rung that holds:

1. Does this need to exist?   → no: skip it (YAGNI)
2. Stdlib does it?            → use it
3. Native platform feature?   → use it
4. Installed dependency?      → use it
5. One line?                  → one line
6. Only then: the minimum that works

Lazy, not negligent: trust-boundary validation, data-loss handling, security, and accessibility are never on the chopping block.

Install

The most effort ponytail will ever ask of you:

The Claude Code and Codex plugins run two tiny Node.js lifecycle hooks, so node needs to be on your PATH (note for Nix/nvm users: it must be on the non-interactive shell's PATH). If it isn't, the skills still work, the always-on activation just stays quiet instead of erroring on every prompt.

Claude Code

/plugin marketplace add DietrichGebert/ponytail
/plugin install ponytail@ponytail

Codex

codex plugin marketplace add DietrichGebert/ponytail
codex

Open /plugins, select the Ponytail marketplace, and install Ponytail. Then open /hooks, review and trust its two lifecycle hooks, and start a new thread.

This same install also covers the Codex desktop app: restart the app after installing and it picks up the plugin.

GitHub Copilot CLI

copilot plugin marketplace add DietrichGebert/ponytail
copilot plugin install ponytail@ponytail

In an interactive Copilot CLI session, use the slash equivalents:

/plugin marketplace add DietrichGebert/ponytail
/plugin install ponytail@ponytail

Copilot CLI namespaces plugin commands by plugin name. For example:

/ponytail:ponytail ultra
/ponytail:ponytail-review

Pi agent harness

pi install git:github.com/DietrichGebert/ponytail

OpenCode

Run OpenCode from a checkout of this repo (the plugin reuses its hooks/ and skills/), and add to opencode.json:

{ "plugin": ["./.opencode/plugins/ponytail.mjs"] }

Injects the ruleset every turn at the active level; adds the /ponytail commands (see Commands). OpenCode also auto-loads this repo's AGENTS.md, so the rules hold even without the plugin. The plugin adds the lite/full/ultra/off levels.

The ./ path resolves against your project's opencode.json; to share one checkout across projects, point it at the absolute path of the .mjs instead (it finds its hooks/ and skills/ relative to its own file).

Gemini CLI

gemini extensions install https://github.com/DietrichGebert/ponytail

Loads the ruleset as always-on context every session and registers the /ponytail commands; the skills/ ship too, activated when a task needs them.

Antigravity CLI

Google is renaming Gemini CLI to Antigravity CLI (the agy binary); the same extension installs there:

agy plugin install https://github.com/DietrichGebert/ponytail

It reuses this repo's gemini-extension.json. One difference: Antigravity converts the /ponytail commands into skills, so you type them into the chat (e.g. /ponytail-review as a message) instead of picking them from a slash menu. Until the migration completes (around June 18, 2026), gemini extensions install still works too. To run it as an always-on rule instead, drop the ruleset into .agents/rules/.

OpenClaw

clawhub install ponytail

Installs ponytail as an OpenClaw skill from ClawHub; the review, audit, debt, and help skills install the same way (clawhub install ponytail-review, and so on). OpenClaw applies it on coding tasks and also exposes it as a /ponytail command. Without ClawHub, copy .openclaw/skills/ponytail into ~/.openclaw/skills/.

That was it. He'd be proud. He won't say it.

Active every session, with a handful of commands (see Commands). /ponytail ultra exists for when the codebase has wronged you personally. Startup and mode-change text shows the current mode.

Set the level for every new session with the PONYTAIL_DEFAULT_MODE env var (lite/full/ultra/off), or a defaultMode field in ~/.config/ponytail/config.json (%APPDATA%\ponytail\config.json on Windows). The default is full.

Cursor, Windsurf, Cline, GitHub Copilot (editor), Aider, Kiro: copy the matching rules file from this repo (.cursor/rules/, .windsurf/rules/, .clinerules/, .github/copilot-instructions.md, AGENTS.md, .kiro/steering/).

Kiro: copy .kiro/steering/ponytail.md to ~/.kiro/steering/ (global) or .kiro/steering/ in your project.

GitHub Copilot CLI fallback (instruction-only mode): it reads AGENTS.md and .github/copilot-instructions.md in a project, or copy the rules into ~/.copilot/copilot-instructions.md to run ponytail in every project. This path keeps always-on guidance, but does not add plugin mode switches or hooks.

VS Code with the Codex extension reads AGENTS.md, which this repo ships, so it works from the repo root with no setup (~/.codex/AGENTS.md makes Codex global).

Which files map to which agent: Agent portability.

Commands

Command	What it does
`/ponytail [lite \	full \
/ponytail-review	Review the current diff for over-engineering, hands back a delete-list.
/ponytail-audit	Audit the whole repo for over-engineering, not just the diff.
/ponytail-debt	Harvest the ponytail: shortcuts you've deferred into a ledger, so "later" doesn't become "never".
/ponytail-help	Quick reference for the commands above.

Commands need a skill-capable host (Claude Code, Codex, OpenCode, Gemini, pi). In Codex they're skills, invoke with @ (@ponytail-review). The instruction-only adapters (Cursor, Windsurf, Cline, Copilot, Kiro, Antigravity) load the always-on ruleset without the commands.

Development

When changing the compact rule text, keep the agent copies aligned:

node scripts/check-rule-copies.js
npm test

The OpenClaw skill package (.openclaw/skills/) is generated from skills/; rerun node scripts/build-openclaw-skills.js after changing a skill, the test suite fails if it is stale.

The correctness benchmark spawns Python for email and CSV checks; python3 is tried before python. CSV checks need pandas installed locally.

FAQ

Does it need a config file? No. An optional ~/.config/ponytail/config.json or PONYTAIL_DEFAULT_MODE env var can set the default level, but nothing is required.

What if I really need the 120-line cache class? You don't. Insist anyway and he'll build it. Slowly. Correctly. While looking at you.

Does it scale? The code you never wrote scales infinitely. Zero bugs, zero CVEs, 100% uptime since forever.

Why "ponytail"? You know exactly why.

License

MIT. The shortest license that works.